What happens to the counter
to the battery.
Seven steps to understand where the power is limited and what
it is appropriate to check before installing a charging point.
The final power depends on the most limited point.
A more powerful wallbox does not speed up the load if the car, supply or any other system element supports less.
RED AND CONTADOR
The supply sets phases and power available, not the figure printed on the wallbox.
TABLE AND PROTECTION
dedicated circuit and protections are dimensioned for the actual installation.
DINAMIC MANAGEMENT
A compatible meter can adjust the load to the instant consumption of the house.
WALLBOX OR EVSE
It communicates the available current to the vehicle and can schedule or authenticate the session.
CABLE AND CONECTOR
They must match current, phases, length and intended load mode.
CAR CHARGER
Convert the alternate current and set the vehicle's own AC limit.
BATERIA
The car system decides how much to accept according to state, temperature and strategy.
Conceptual map, not assembly scheme. See the official text of the ITC-BT-52 and to an enabled installer.
Orientation time to add 40 kWh.
The comparison uses energy divided by nominal power to visualize magnities.
The real result can be greater and never exceed the limit of the car, equipment or installation. For your case, use the load time calculator.
Six decisions that should be made clear.
Define use
Daily kilometers, energy to be recovered, current or planned time and vehicle.
Check the car.
Connector, maximum AC power, number of phases and limits indicated by the manufacturer.
Check the supply
Fases, power available and consumption that match the recharge.
Trace the circuit
Tour, section, protections and scheme according to regulations and instructions.
Choose location
Distance to the port, cable maneuver, open, punches and access control.
In-service
Configuration, checks, documentation and explanation of use by the professional.
Important: This route organizes the conversation with a professional. It contains no instructions to intervene in an electrical installation.
Three options to continue comparing.
Model reference marks to move from calculation to choice. Check power, phases and cable before deciding.
See all brands →
Wallbox Press Black Max · 7.4 kW · 5 m
Compact monofasic Wallbox with Type 2 cable, app, Wi-Fi, Bluetooth and extendable energy functions.
Add to comparator →Check the exact variant before buyingWallbox Press Max · 22 kW · 5 m
Press Max with Type 2 cable of five meters, connectivity by app and declared three-phase power up to 22 kW.
Add to comparator →Check the exact variant before buying
Wallbox Press Max with Type 2 · 7.4 kW take
Monophasic version of the Max Pulsar with Type 2 take, designed to use a separable load cable and control sessions from the app.
Add to comparator →Check the exact variant before buying