What should you take from this guide
- Position of the port
- Parking in front and back
- Passing areas
- Support and storage space
The correct length covers the usual maneuver without creating excess on the ground.
Read the process from left to right. Each step must be resolved before turning the choice into a purchase.
Measure two scenarios
It measures with the car parked forward and back, from the point to the port, following a route that does not cross passing areas.
It leaves room, not too much.
Add margin for curves and handling without tensile connectors. Avoid buying 10 meters per default if five allow to connect with slack.
Power and phase check
Length does not replace current, phase, connector and nominal power verification. The point and car will continue to limit the load.
Measure before deciding
Repeat the measurement with the car parked in both ways and consider where the port is. Follow the real cable path around the vehicle, not a straight line that crosses a passing area.
Add a slack to connect without tension, but value weight, volume and storage. If you change car often, an additional margin can be useful; if the square is stable, the excess only complicates the use.
Checklist before continuing
- Position of the port
- Parking in front and back
- Passing areas
- Support and storage space
Make the guide a decision.
Enter battery, percentage, power, rate and household consumption. Calculations run on your browser and do not require registration.
Limits and security
The results and explanations are indicative. They do not constitute an electrical project, compatibility certification or assembly instruction. The installation must be reviewed by a professional who is qualified in accordance with the applicable rules and the manufacturer's instructions.
